In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it is really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Be sure the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! dogsrecommend.com/dog-mask The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you are done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to glue the mask on your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Make certain it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged firmly onto the face of your dog. Don’t make the folds too large or else it might look messy. Once you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Be sure the ears are flat and make certain it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask because your pet security, you will have to do some sanding to make sure that it is secure on your dog. You can accomplish this by sanding off any excess paper which might have been removed from your mask.

Geef een reactie

Het e-mailadres wordt niet gepubliceerd. Vereiste velden zijn gemarkeerd met *

Proudly powered by Wpopal.com
X
Add to cart